Metallic epoxy flooring in Wesley Chapel FL - a design floor built on a dry slab
Tired of a plain gray slab? We check the concrete for moisture first, then pour a metallic floor in colors you help choose.
- Fully licensed and insured.
- Free in-person estimates.
- Expect a reply within 1 business day.
Is metallic epoxy a good fit for my floor in Wesley Chapel?
Metallic epoxy flooring is a poured coating with three layers. A translucent metallic coat goes over a colored basecoat, and a clear topcoat goes over both, so a plain concrete slab in Wesley Chapel becomes a floor with real depth and movement to it.
Most people who call about this have a garage, bonus room or shop floor that's gray, stained or patched, and they want it to look finished. The price mostly comes down to the slab and the size of the space. That means how much concrete grinding it needs, whether an old coating has to come off, how many cracks need filling, whether moisture calls for a barrier coat, and which topcoat you choose. The schedule turns on the same prep and on how long your topcoat has to cure before you can use the floor. I put all of it in a written estimate that lists the prep and the finish, so you can see what you're paying for.
How do you know your floor needs more than a fresh coat?
Old coating peeling up
If paint or epoxy is lifting at the edges or coming up in flakes, it usually went down on a damp or poorly prepped slab. The longer you wait, the more comes loose, and every bit of it has to be ground off before anything new can bond.
Dark, damp-looking spots
Patches that stay darker than the rest of the slab, or a white powder that keeps coming back, usually mean moisture is moving up through the concrete. Any coating you put over that without dealing with it first is likely to let go.
Stains and mismatched patches
Oil spots, rust marks and old patch repairs leave a floor looking worn even when the slab is sound. A metallic coat covers the color, but oil that sits for years soaks deeper and takes more grinding to clean out first.
How we install metallic epoxy flooring
Before we talk about colors, I look hard at moisture in the slab, because a design floor is only as good as the dry concrete under it. Once the slab checks out, our crew grinds it to open up the surface so the coating can grip, fills cracks and pits, and plans with you how to handle the saw cuts in the concrete. Then we help you choose the basecoat color with the metallic layer in mind, because it changes the whole look. We roll out the basecoat, pour and work the metallic coat over it, and finish with a clear topcoat that helps the floor resist scratches.
Metallic isn't right for every floor, and I'll tell you when it isn't. If the space takes heat, hot water and strong cleaners every day, urethane cement flooring usually suits it better. If you'd rather have no coating at all and let the concrete be the finish, polished concrete flooring is the simpler choice.
Garages and workshops
A metallic floor turns a bare garage slab into a space you'd actually show people, and the clear topcoat helps it hold up to scratches. It suits owners who can keep cars out for the full cure time after we finish.
Living spaces and storefronts
Bonus rooms, home offices and small shop floors get the most out of the design, because people see the floor up close every day. It suits interior slabs that test dry, or ones where we can lay a barrier coat down first.
Get your metallic floor priced, prep and finish both
Send the form and we'll get back to you within one business day to set a time for me to come look at the floor. The visit and the written estimate are free, and there's no obligation to go ahead.
(813) 471-5856Metallic epoxy flooring on Wesley Chapel slabs
Wesley Chapel sits in Pasco County, where most houses are built slab-on-grade, which means the concrete is poured right on the ground. One Tampa Bay cost guide says Florida's high water table and humid climate mean those slabs regularly test at or above the humidity level where standard epoxy stops holding. That's why one maker of metallic systems requires a suitable moisture barrier under slabs on the ground, because seasonal changes in ground moisture can push vapor up through the concrete even after an earlier test came back fine. So I check the slab before I quote. If it needs a barrier coat, that goes in the estimate, and if metallic isn't the right floor for that room, I'll tell you.
We're based in Wesley Chapel and work across Pasco County and northern Hillsborough County, and we run into the same damp slabs on jobs in Land O' Lakes and Zephyrhills. Garages here also get hot and sticky in summer, so we watch conditions on the day we pour, since a coating laid on a sweating slab won't bond the way it should.
What happens after you call about a metallic floor in Wesley Chapel?
Call us or send the form
Call (813) 471-5856 or use the form, and we'll set a time for me to come see the floor. It helps to tell us the size of the space and what's on the slab now.
I check the slab in person
I look the concrete over for moisture, cracks and old coatings and talk through basecoat colors with you. You get a written estimate that lists the prep and the finish separately, so you know what the floor needs before you spend anything.
Our crew preps and pours
Our installers grind and repair the slab, then lay the basecoat, the metallic coat and the topcoat. I stay involved from the first day to the last.
We walk the floor together
Before we pack up, we walk the finished floor with you and go over anything you want to look at. After that, keep people and cars off it for the full cure time of your topcoat.
Frequently asked questions
How much does metallic epoxy flooring cost in Wesley Chapel?
The price depends mostly on the condition of your slab and the size of the floor, so I give you a figure after I've seen it rather than guessing over the phone. Grinding, stripping an old coating, crack repair and a moisture barrier all add to the job, and so does the topcoat. One supplier highly recommends a urethane topcoat over metallic floors to help prevent scratching, so when you compare quotes, check which topcoat each one includes.
Can moisture in my concrete slab make an epoxy floor fail?
Yes, moisture coming up through the slab is one of the most common reasons an epoxy floor lifts or peels. The vapor builds up under the coating and breaks its grip on the concrete. That's why we check before quoting and plan a barrier coat when a slab needs one.
How do I check my concrete for moisture before an epoxy floor?
A simple screening test is to tape a 2-by-2-foot sheet of plastic to the concrete and leave it for 24 hours. Heavy condensation under the plastic points to a moisture problem that can cause epoxy to fail. Careful contractors go further and run a calcium chloride test or an in-place relative humidity test before quoting, so ask anyone bidding on your floor, us included, which test they'll run and when.
How does the basecoat color change a metallic epoxy floor?
The basecoat shows through and sets the overall tone, because the metallic coat on top of it is translucent. One maker's instructions note that a white or light basecoat gives a lighter floor and a black or darker one darkens the metallic look. Pick the two colors together, not one at a time.
How long before I can walk or park on a new metallic epoxy floor?
In one supplier's system, the urethane topcoat needs 72 hours to cure before the floor opens to traffic. Plan to keep people, pets and cars off it for that whole time. The topcoat on your floor decides the exact wait, and I'll tell you what it is at the estimate.
Will the control joints in my concrete show through metallic epoxy?
Yes, the straight saw cuts across a slab stay visible when the metallic coat goes right over them, and that isn't a defect. You can leave them showing or have them filled, but it has to be decided before the coating goes down, so we'll ask you at the estimate.
Wesley Chapel, FL
Plan your metallic floor, starting with the slab
Call or use the form with the size of the room or garage, the slab's age and condition, and any basecoat colors you have in mind, so the visit starts with your floor.